During my first experiments with resin stabilized wood, I had a lot of dark brown leftover resin at the end of it. So I have decided to do a little experiment.

I took some old black jeans, cut them into squares of approximately the sizee of a hand palm, soaked the pieces in the resin, stacked them in a receptacle and I poured all the remaining resin all over them. I have tried my best to chase and push manually all the bubles out and let it harden.

The resulting material has an official name – micarta – and the results look quite well, I think.

© Charly, all rights reserved. Click for full size.

© Charly, all rights reserved. Click for full size.

The pieces were not too big, but big enough for four small scales for two of the badger knives that I had in production, so I have used them straightaway. The material works well, it is sufficiently hard to take decent polish, but not so hard as to be difficult to work with. It does heat up a bit and clogs up sanding belts, but reducing the belt speed and using only fresh belts did away with that problem.

© Charly, all rights reserved. Click for full size.

© Charly, all rights reserved. Click for full size.

That the layers are not perfectly perpendicular and flat adds a bit more character to the material, which I like. I think it is a good way to use excess resin and these knives should now be extremely resistant to elements – the blades and fittings are all stainless steel, the handle scales are micarta and the sheaths are leather infused with beeswax. They would probably survive for a non-trivial duration in fog and rain outdoors. Not that I would do that to them.

I am also pleased that now that these knives are significantly less work than the bowie-type small hunting knivest that I was presenting previously. The goal is to have a mix of cheap(ish) and expensive items on offer in the future, I do not wish to only make luxury items that take weeks to months finish each, neither do I wish to destroy my enjoyment of the craft by bogging myself down in repetitive tasks o making the same thing over and over again.